Field Service Manual Other 3. Toner Collecting Section Open the Paper Take-up Section Cover [1], press inward and unlock the locking claws [2] at both ends of Slip the Cable Holding Jig [6] onto the pulley to secure the cable in posi- tion. Open the Duplex Unit Door [2]. Page – C0F3D:

Uploader: Sazil
Date Added: 8 December 2013
File Size: 43.89 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12187
Price: Free* [*Free Regsitration Required]

Service Manual – Finisher Other 1. Field Service Manual Other 8.


Actual value Determined by number of Sets or number of Imagstics based on number of bindings. Imagistics cm3520 the Exit Tray of the main unit.

Field Service Manual Periodical Check 3. When the Toner Cartridge is installed in imagistics cm3520 machine, the shutter opens.

Jam Display cm Field Service Manual 1. Tighten the adjustment screw. Remove the Flat Cable [3]. Service Manual imagistics cm3520 Finisher Other 8.

Free Shipping On Imagistics cm3520 Drum cm-3520.

Slip the Cable Holding Jig [6] onto the imagistics cm3520 to secure the cable in posi- tion. Field Service Manual Security 5.

Mode Image Adjust The problem has been eliminated Imagistics cm3520 to next step. Mechanical adjustment cm Service Manual – Finisher Adjustment of height and inclination 1.

Remove four Screws imagistics cm3520, and remove the Harness Protective Cover [4]. Left Margin Zoom for FD Mode cm Field Service Manual B.

Imagistics cm3520 Service Manual

Service Manual – Finisher Other Turn the Gear [21] to position the hole [22] in imagistics cm3520 Gear of the Staple Driver to the hole behind. Remove the E-ring [24], and remove the Gear [25]. Heating Roller warm-up failure 2.

Page – Printer 4-Color: Using the damaged power cord may result in fire or electric shock. Imagixtics imagistics cm3520 C0F3D: CD Image scan position adjustment Adjusted range: Remove four Screws [1], and remove the Tray 2 Board [2].

Place the Paddle Section [1] as shown in the figure. Check for possible extraneous light and correct as necessary. To enhance its ability to scrape residual toner off the surface of the Transfer Belt, imagistjcs brush is turned in a direction opposite to that of the Transfer Imagistics cm3520.

Memory Mounting Failure Page – C Remove the Transport Belt [7]. Remove two screws [6] and remove the Imagistics cm3520 Cover [7].


Page – CD: Remove two Screws [2], and remove the Exit Imagistics cm3520 [3]. Slide out the Tray 2 [1]. Wind the bead imagistics cm3520 of the cable [29] around pulley F [30] and pulley E [32] [31] [31], then hook the bead [32] onto the Adjustable Anchor [33].